Jiangyin Rongjun Hardware Co. Ltd
محصولات
محصولات
خونه > محصولات > گیره های پنوماتیک > How to Avoid the “Clamp Opening Too Small” Problem for Aluminum Profiles? KRT-110 Selection Guide

How to Avoid the “Clamp Opening Too Small” Problem for Aluminum Profiles? KRT-110 Selection Guide

جزئیات محصول

محل منبع: چین

نام تجاری: Krieit

شماره مدل: KRT-110

شرایط پرداخت و ارسال

مقدار حداقل تعداد سفارش: 500

جزئیات بسته بندی: بسته بندی شده در کارتن ها

زمان تحویل: 5 روز

شرایط پرداخت: D/A,D/A,D/P,T/T

قابلیت ارائه: 1000 عدد در روز

برجسته کردن:

pneumatic clamps for aluminum profiles

,

aluminum profile clamp selection guide

,

KRT-110 pneumatic clamps guide

مدل:
KRT-110
نوع محصول:
گیره پنوماتیک
طول کلی:
112 میلی متر
باز شدن در حال استراحت:
41.15 میلی متر
حداکثر باز شدن:
90 میلی متر
باز کردن محدوده تنظیم:
41.15-90 میلی متر
سفر افتتاحیه در دسترس است:
48.85 میلی متر
برنامه اصلی:
گیره پروفیل آلومینیومی / خط درمان سطح
سفارشی سازی:
در صورت درخواست در دسترس است
مدل:
KRT-110
نوع محصول:
گیره پنوماتیک
طول کلی:
112 میلی متر
باز شدن در حال استراحت:
41.15 میلی متر
حداکثر باز شدن:
90 میلی متر
باز کردن محدوده تنظیم:
41.15-90 میلی متر
سفر افتتاحیه در دسترس است:
48.85 میلی متر
برنامه اصلی:
گیره پروفیل آلومینیومی / خط درمان سطح
سفارشی سازی:
در صورت درخواست در دسترس است
How to Avoid the “Clamp Opening Too Small” Problem for Aluminum Profiles? KRT-110 Selection Guide
Problem | Why Is “Clamp Opening Too Small” a Common Issue? In aluminum profile processing and surface-treatment operations, insufficient clamp opening is a common selection problem. Many users provide only the overall profile width or check only the maximum clamp opening. However, the dimension that controls real compatibility is often different from the nominal profile width. The KRT-110 has a 41.15 mm resting opening, a 90 mm maximum opening, and an overall length of 112 mm
محصولات مشابه